B.A. International BA OPTIMA E+ BAE380R Скачать руководство пользователя страница 4

Страница: 4 / 26

1.7.10 Do not remove the contra angle before the motor handpiece

stops rotating. Otherwise the contra angle and the gear inside motor

handpiece will be broken.

1.7.11 Please confirm that the file is properly installed and locked in

place before starting the motor handpiece.

1.7.12 Please set torque and speed as per the recommended

specifications of file manufacturer.

1.7.13 Error in replacing lithium batteries can lead to unacceptable

risks, so use the original lithium battery and replace the lithium battery

according to the correct steps in the instructions.

1.7.14 Please remove the battery if the motor handpiece is not likely

to be used for some time.

1.7.15 Wireless charging will generate heat, and the surface

temperature of charging base and motor handpiece will rise. It is

recommended not to come in contact with the motor handpiece and

charging base during wireless charging for more than 10 seconds.

1.8 Device safety classification

1.8.1 Type of operation mode: Continuous operating device

1.8.2 Type of protection against electric shock: Class II equipment

with internal power supply

1.8.3 Degree of protection against electric shock: B type applied part

1.8.4 Degree of protection against harmful ingress of water: Ordinary

equipment (IPX0)

1.8.5 Degree of safety application in the presence of a flammable

anesthetic mixture with air, oxygen, or nitrous oxide: Equipment cannot

be used in the presence of a flammable anesthetic mixture with air,

oxygen, or nitrous oxide.

1.8.6 Applied part: contra angle, lip hook, file clip, touch probe.

1.8.7 The contact duration of applied part: 1 to 10 minutes.

1.8.8 The temperature of the surface of applied part may reach

46.6℃.

1.9 Primary technical specifications

1.9.1 Battery

Lithium battery in motor handpiece: 3.7V /2000mAh

1.9.2 Power adapter (Model: UE08WCP-050100SPA)

Input: 100V-240V ~50-60Hz, 400mA

Output: DC5V/1A

1.9.3 Torque range: 0.4Ncm-5.0Ncm

（

4mNm ~ 50mNm

）

1.9.4 Speed range: 100rpm~2500rpm

1.9.5 Wireless charging

Frequency range: 112-205KHz

Maximum RF output power of the product: 11.87dBuA/m@3m

1.10 Environment parameters

1.10.1 Environment temperature: +5℃ ~ +40℃

1.10.2 Relative humidity: 30% ~ 75%

1.10.3 Atmospheric pressure: 80kPa ~ 106kPa

2 Installation

2.1 Basic accessories of product

Motor handpiece (BA182610) Contra angle (BA182611)

Charging base (BA182612) Nozzle (BA182613)

Protective silicon cover (BA182614)

Power adapter (EU: BA182615; UK: BA182616; US: BA182624)

Содержание BA OPTIMA E+ BAE380R



























Результаты поиска

Содержание BA OPTIMA E+ BAE380R

Отзывы:

Бренды по названию

Популярные бренды

B.A. International BA OPTIMA E+ BAE380R, Инструкция по эксплуатации

Результаты поиска

Содержание BA OPTIMA E+ BAE380R

Отзывы:

Бренды по названию

Популярные бренды