Aztec Tents STANDARD FRAME, Руководство по эксплуатации продукта

Страница: 11 / 43

www.aztectent.com
Installation Procedure:
15’ Wide
Step 1:
Lay out four (4) corner fi ttings and four (4- 14’ 4”) spreader pipe to form
perimeter frame. Layout (4) hip rafters (10’6”) on the ground and place
the 4pt Crown in the center of the tent.
Step 2:
Start assembling the frame by inserting and pinning the four hip rafter
poles to the 4pt Crown. Connect the corner fi ttings to the bottom of the
rafter pipes.
Step 3:
Start at one corner of the tent and connect and pin the corner fi tting to
the perimeter pipe.
Step 4:
Continue by connecting and pinning the perimeter pipe to this corner
and work your way around the tent connecting all of the perimeter
pipes and corner fi ttings until all of the upper framing is connected and
pinned.