Aztec Tents STANDARD FRAME, Руководство по эксплуатации продукта, Страница: 13 / 43

www.aztectent.com
Installation Procedure:
20’ Wide
Step 1:
Lay out four (4) corner fi ttings and eight (8- 9’ 4”) spreader pipe to form
perimeter frame. Lay out (4) hip rafters (14’4”) on the ground and place
the 8pt Crown in the center of the tent.
Step 2:
Start assembling the frame by inserting and pinning the four hip rafter
poles to the 8pt Crown. Connect the corner fi ttings to the bottom of the
rafter pipes.
Step 3:
Connect and pin the four (4) rafter pipes to the 8pt crown
Step 4:
Start at one corner of the tent and connect and pin the corner fi tting to
the perimeter pipe.