Aztec Tents STANDARD FRAME, Руководство по эксплуатации продукта, Страница: 10 / 43

www.aztectent.com
Step 5:
Layout the tent top over the frame and use the buckles on the underside
of the top to attach to the frame. Secure the two buckles closest to the
corner fi tting fi rst then tighten the remainder of the buckles. You may
want to lay out a ground cloth at this time to prevent damage to the
tent top when it touches the ground.
Step 6:
Lift up one side of the tent off the ground and slide two of the leg pipes
over the corner fi tting and pin into place.
Step 7:
Lift up the other side of the tent and install and pin the leg pipes on the
other two corner fi ttings.
Step 8:
Anchor the tent with the included stakes and ropes. The ropes should
be tied around each of the perimeter fi ttings with an overhand slip
knot. The stakes should be driven approximately six (6) feet away from
the bottom of the leg. To achieve proper rope tension, drive each stake
approximately 38” into the ground with a sledge hammer. Tie the rope
to the stake with a clove hitch and continue driving the stake into the
ground until the rope is tight