2ª 10028 – E 03 - 2016
17
A15. Water inlet Electro-valve
This allows water from the mains to enter the cold water
deposit. It works on 230 Vac.
It has a security mechanism for cases where solids, such as
scale or any other solids, or the EV does not close properly and
does not cut the entry of water into the machine. This
mechanism is activated when the level of water in the waste
water bucket reaches its maximum.
To reset the EV, just reduce the mains water pressure. If this is
not possible, a light tap with a rounded object, like an Allen key, inside the hole (as shown in
the figure) in the upper part of the EV will suffice.
It is also possible to reset it by giving the EV a sharp knock with the handle of a screw driver.
