1ª 10279 – E 11 - 2011
36
Between pins 6 and 7 shows 0 Vdc when there are no cups between the photocells.
Microswitch of the cup lever
Measured on the cup holder board on connector
J5
.
Between pins 3 and 7 shows 5 Vdc when the lever is at rest.
Between pins 3 and 7 shows 0 Vdc when the lever closes the micro.
End of run microswitch cup extractor
Measured on the cup holder board on connector
J5
.
Between pins 4 and 7 shows 0 Vdc at rest position of the motor.
Between pins 4 and 7 shows 5 Vdc when the motor is extracting a cup.
Sugar arm microswitch
Measured on the cup holder board on connector
J7
.
Between pins 2 and 3 shows 5 Vdc at rest position.
Between pins 2 and 3 shows 0 Vdc when the arm moves.
Temperature sensor
Measured on the infusion board on connector
j2
. Measure resistance values (see the
table of values of the PTC).
