2ª 10028 – E 03 - 2016
29
3.2.2 Electrical Connexion
The machine requires a voltage of 230 Vac (50 Hz). The installation point must have:
A “Euro” approved socket with an earth connection.
A minimum power rating of 2,500 w.
The electrical installation where the machine is sited will be protected with a cut off
fuse and have an earth connection.
3.2.3 Installation of the coin changer
The machine will accept a coin changer with MDB or Executive protocol. The support is the
same for the two models. It is fitted into the support with three screws. See point A11 Coin
system.
On connecting the machine to the mains, the machine automatically recognises which type of
coin changer is fitted.
3.2.4. Filling of the product hoppers
To put the product in the hoppers, either for the instant products or the coffee beans, just lift
the cover of each one of the hoppers and pour in the corresponding product.
W1. Hopper for coffee beans
W2. Hoppers for instant
products
Whenever a hopper is empty, and after filling it, it is recommended to
elaborate a service so that the spiral moves the powder to fill the empty
spaces so that it can deliver the correct quantity programmed.
