Page 11
3
PREPARE FOOT
BLOCKS
1
CUT POSTS AND
TEMPORARILY
INSTALL POST
SLEEVES
Min. 35 1/2”
Top Rail Length
Bottom Rail Length
2
MEASURE AND TRIM
UNIVERSAL RAILS
Stair Angle
• Posts must be
positioned no more
than 8’ on center,
and must be plumb.
• Trim post a min of
35 1/2” (for 36”) or
41 1/2” (for 42”)
above finished deck
surface.
• Slide Post Sleeve
over 4x4 Post. Do
not force.
• Posts may need to
be slightly taller for
stairs.
• Rest the bottom Universal
Rail on stairs and transfer
the length and angle of
the stairs onto the rail.
• Trim the rails to
necessary length and
angle.
Bore 1/2”
by 2 1/2”
deep
Drill 3/16”
Hole
Stair Angle
• Temporarily place bottom
Universal Rail in place to
plan where Foot Blocks
will go.
• Cut Foot Blocks to length
at the correct angle.
• Counter-bore the foot
block and using the #10
x 2” screws
Do not cut Post Sleeves in this step.
Installing Evolutions Rail™ Contemporary Stairs
with CableRail by Feeney
®
