AB-6438
3
CAUTION
(2/2)
Take anti-lightening measures based on regional and building characteristics.
Lightening might cause fire or critical damage to the products without the anti-lightening measures.
Take anti-noise measures if the product is installed in a location near electric noise sources.
Failure to do so might cause malfunction or device failure.
Be sure to provide a circuit breaker for the power to the product as the product does not have a power switch.
Firmly tighten the terminal screws.
Insufficient tightening of the terminal screws might cause fire or overheating.
For wiring, strip each wire insulation for the length specified in this manual. If the strip length is longer than the
specified, the stripped part of the wires will be exposed, causing electric shock or short circuit between adjacent
terminals. If it is shorter, the stripped part will not contact the connector.
Do not use unused/spare terminals on the product as relay terminals.
Doing so might cause malfunction.
Do not block the ventilation holes of this product. (Be sure to peel off the protective sheet after installation and wiring).
Doing so might cause device failure.
If more than the rated power voltage is applied to the product, replace the product with new one for your safety.
Failure to do so might cause fire.
Do not disassemble the product.
Doing so might cause device failure.
When replacing batteries, read the instructions hereinafter and correctly replace the product batteries.
Failure to do so might cause overheating, burst, or leakage of the batteries.
Dispose of the used batteries in accordance with your local regulations.
Do not throw them in fire or in general garbage.
Doing so might cause burst or ignition.
Dispose of this product as industrial waste in accordance with your local regulations. Do not reuse all or a part of this
product.
