AB-6438
10
Installation
CAUTION
Installation and wiring must be performed by qualified personnel in accordance with all applicable safety standards.
Installation locations
●
Install Infilex AC in a control panel.
●
Do not mount Infilex AC under the conditions of high temperature and humidity.
●
Leave at least 35 mm clearance between the top/bottom surface of Infilex AC and other devices.
Mounting position
Do not mount Infilex AC with the body tilted. Always mount it in the positions as shown in the figure below. No other mounting
positions are allowed.
Upright
Sideway (allowed only when I/O module, UT module, or integral type Operator Panel is NOT assembled with the
basic
unit)
Note:
* Do not mount the Infilex AC basic unit sideway with the power supply terminals located upper corner, lying on its back, or lying face down.
Figure 5 Mounting positions
Do not tilt.
Do not tilt.
Vertical (upright)
direction
Power supply terminals
located on the lower corner
of the front face
Vertical (upright)
direction
