AB-6438
12
Direct screw mount
The following figure shows the mounting dimensions of Infilex AC mounted directly on a mounting surface with screws.
The width may vary depending on how many modules (I/O module, UT module, and integral type Operator Panel)*
1
are
assembled with the Infilex AC basic unit.
Width of Infilex AC = 60 mm*
2
+ 30 mm*
3
x n (quantity)
Notes:
*1 Regarding I/O modules, UT module, and the integral type Operator Panel that can be assembled with Infilex AC basic unit, refer to
AB-6527 Specifications/Instructions of Model RY50XX
.
*2 Width of Infilex AC basic unit
*3 Width of I/O module, UT module, or integral type Operator Panel
Hatched area in the figure below shows the maintenance clearance.
Note:
* Up to two modules (I/O module and/or UT module/integral type Operator Panel) can be assembled with the basic unit.
Figure 7. Mounting dimensions (mm): Direct screw mount
To mount Infilex AC with screws, the screw tabs (Part No. 83165861-001, with separate order required) are required. Mount and
fix Infilex AC on the mounting surface with M4
8 screws. (One screw tab and two screws for one basic unit/module are
required.)
DIN rail holder
Pull down the DIN rail
Screw tab Part No.
Rear
side
Screw
20
20
30 45 30
35
140
15
7
To attach the screw tab,
insert the screw tab into
the slit provided on the
rear side of Infilex AC.
Infilex
AC
60 + 30
n
Insert.
* See Note.
