AB-6438
17
Connection of our engineering tool (Data Setter / PC-MMI)
●
Connection of Data Setter Model QY5111B
No conversion cable is required. Directly insert the male connector of the Data Setter into the female connector provided on
the Infilex AC basic unit.
At this time, hold the male connector with the
◄
mark facing left and insert it so that the mark points to the
►
mark on the
Infilex AC basic unit.
●
Connection of Data Setter Model QY7211B
Convert the D-SUB connector to the mini DIN connector with the conversion cable (Part No. 83104995-001).
At this time, hold the male connector with the
◄
mark facing left and insert it so that the mark points to the
►
mark on the
Infilex AC basic unit.
Figure 14. Connection of our engineering tool
System indication label for the controller number
The indication tag has the system indication label on its back. Turn it over and fill in the controller number on the label.
Figure 15. System indication label
Insert the male
connector as the two
marks point to each
other.
Turn over.
Indication tag
