AB-6438
© 2012-2017 Azbil Corporation All Rights Reserved.
1
Specifications/Instructions
Infilex
™
AC
Air Handling Unit Controller
for NC-bus Communication
General
Infilex AC Model WY5117C1XXX is a DDC controller for AHU.
It is installed in a small space such as an AHU control panel.
Infilex AC is equipped with inputs and outputs suitable for
AHU control, and its software is freely editable in response to
the applications.
Operator interface and room user terminal are connectable to
Infilex AC, supporting you in various situations to operate
Infilex AC.
Infilex AC also is networked with our BMS via our proprietary
protocol NC-bus. Infilex AC sends operating status to the
BMS and performs operating management in accordance
with the commands sent from the BMS in order for you to
integrally control and manage a whole building.
The time scheduling function of Infilex AC, on the other hand,
enables autonomous-distributed control.
AHU: Air handling unit
BMS: Building management system
DDC: Direct digital control
Features
●
Compact
design:
Small sized body fits inside a control panel of a compact
AHU.
●
Wide range of input/output (I/O) combinations:
Model with the I/O combination best-suitable for the air
conditioning controls you desire, such as outdoor air
cooling control, humidification, etc. is selectable.
●
Increase in I/O points:
An I/O module is added to Model WY5117C140X for
increasing the I/O points.
●
Operator interface (Operator Panel):
Operator Panel (panel mount type/integral type)
connected to Infilex AC allows you to change the settings
of Infilex AC without accessing Infilex AC from the BMS.
●
Room user terminals:
User terminal (Neopanel or Neoplate) is connectable to
Infilex AC, enabling the room occupants to turn on/off air
conditioning unit and change temperature setting.
●
Cooperation
with
BMS:
Infilex AC is networked with our BMS to centrally monitor
and control AHU
.
●
Autonomous distributed control:
Even if a trouble occurs in the BMS, Infilex AC
individually performs backup operation to distribute
potential risks caused by malfunction of the BMS.
●
Installation:
Screwless push-in terminals for I/O reduce wiring
workload.
Additionally, either DIN rail mount or screw mount is
selectable.
●
CE Marking certified product:
Infilex AC Model WY5117C conforms to all the
applicable standards of CE Marking.
DIN: Deutsches Institut fur Normung (German Institute for
Standardization)
