ayerbe 145/G, Руководство пользователя

Страница: 43 / 52

ENGLISH INVERTER 145-165/G
MACHINE STARTING
The starting of this machine must be performed by expert staff. All
connections must be performed according to the current regulations and
with full respect towards the risk prevention law.
C
A
B
E
I
D
MMA welding with coated electrode
1)
Connect (unless oppositely stated in the electrode packaging) the electrode
holder clip to the positive terminal (A) and the exposed conductive part to the
negative welding source terminal (B).
2)
Press the on/off-switch (C) from the top side of the machine. Before this, the led (D)
must be illuminated, this led (D) inform that the machine is protected with the G-Box.
3)
Set the welding intensity by means of the potentiometer (E) and weld.
Should the led (I) turn on during the welding process, the machine will be
thermically protected and will stop working until its internal temperature is regulated;
if that is the case, simply wait until the led turns off in order to continue welding in the
usual way.
User’s Manual 6