EN-43
short circuit or fire by unprofessional installation! The appliance may be
connected to the mains supply only by an authorized qualified person
and the appliance is only guaranteed after correct installation.
Risk of electric shock, short circuit or fire by damage of the mains lead!
The mains lead must not be clamped, bent or trapped or come into
contact with hot parts of the appliance. If the mains lead is damaged,
it must be replaced by a qualified electrician.
The mains supply must correspond to be data specified on the rating
plate of the appliance. The appliance mains cable must correspond to
the specifications and the power consumption.
Risk of electric shock!
Before starting any work on the electrical installation, please
disconnect the appliance from the mains supply.
INSTALLATION NOTES
Before installation
The appliance should be installed built in the cabinet. It should be keep
safety distance with appliance and the kitchen walls. Detail please check
below picture. (Values in mm)
Surfaces, synthetic laminates and adhesives used must be heat
resistant(100
℃
minimum), and neighbouring unit fronts up to 70
℃
.
Kitchen cabinets must be set level and fixed. A gap of 5 mm is required
between the appliance and surrounding unit fronts.
If there is a drawer beneath the oven, a shelf must be installed between
oven and drawer.
Check that the oven has been fixed securely in the housing. Fixing the
oven into the cupboard is done using 2 screws. One in each corner of
the oven door frame.
Содержание AF71BP
