AYA AF71BP, Инструкция по эксплуатации

Страница: 76 / 102

EN-22
Function icon instruction
Icon Function Icon Function
Top outer heat element Top inner heat element
Heating fan (Defrost) Bottom heat element
PROGRAM AND PRODUCTION FUNCTIONS
1. Power on
Connect your appliance to the mains supply, all indicator lights of the
display board will light up for 1second and then enter the clock setting state.
Default time show 12:00, hour “12” flashes, the system clock setting icon “ ”
flashes, and the system clock icon “ ” is always on. The clock can be input
at this time, refer to clock setting requirement for details.

After 10 seconds without any operation and the oven will enter to
adjust minute automatically.

Within 10 seconds without any operation when adjusting minute, the
oven will enter standby mode automatically.

Under the standby mode, the display always shows system time.(Refer
to picture 3 for the display effect.)
Pic 3: Initial standby mode
When the oven is powered on, the oven door lock will start to self-inspection.
During the self-inspection, the door lock will run back and forth
automatically. If there is no abnormal alarm within 20 seconds, then self-
inspection is completed. Or if it shows fault code “E-3” during the self-
inspection, please refer to protection function for problem analysis, you can
touch “ ” to cancel the fault code and return to standby mode.