AXIS T8504–E Outdoor PoE Switch
Web interface
Web interface
Web interface menu
Status
Go to
Status
to view the unit status. The page is updated automatically every few seconds.
Note
The Ethernet network link is always enabled, regardless of PoE configuration (enabled or disabled).
Parameter
Description
Blue symbol — PoE power is provided
Gray symbol — No PoE power
Blue symbol — PoE port is enabled
Gray symbol — PoE port is disabled
Blue symbol — Ethernet link is on
Gray symbol — No Ethernet link
Blue symbol — SFP module is inserted into the uplink port
Gray symbol — Uplink port has no SFP module inserted
Network
Reports the Ethernet link speed (10/100/1000 MB) and if the network connection is up or down
Status
Reports the PoE port status, if it is enabled, disabled, delivering power, etc.
Power usage
Reports the actual power consumption and the maximum power it can deliver
PoE reset
Click
Reset
to turn off the PoE port power and restore the PoE power back on.
Note
A PoE port which is disabled by SSH or SNMP will be enabled after a PoE reset.
Total power usage
Reports the aggregated power consumed by all PoE ports and the percentage of the consumed
power relative to the internal power supply power capabilities.
Basic
Go to
Basic
to view basic information about the product.
IP address in use -
Go to
IP address in use
to view information about IPv4 and IPv6 addresses, masks, default gateways and
Domain Name Servers (DNS).
Product information -
Go to
Product information
to view general product information such as product name, serial number,
software version and PoE firmware version, and SFP module information such as SFP type, vendor, part number and serial number.
9
