AXIS T8504–E Outdoor PoE Switch
Web interface
Maintenance
Reset -
There are four different reset options:
•
Do a safe restart without losing PoE power
resets the internal network manager and the internal Ethernet
switch (network will be down for a few seconds), leaving the PoE power unchanged. Powered devices continue
normal operations as if no reset is done.
•
Do a safe restart
resets the internal network manager, internal PoE controller and internal Ethernet switch.
•
Restore the factory values but keep the IP settings
resets unit configuration to factory default, leaving IPv4/IPv6
network configuration unchanged. VLAN and RADIUS/ is disabled. The option to access the unit over the
network as before is maintained.
•
Restore all factory values
restores the unit to full default factory setting. Unit IP is set to 192.168.0.254 and
VLAN is disabled.
Firmware upgrade -
A firmware upgrade upgrades only the internal network manager. PoE firmware is unchanged. The upgrade can
take up to 10 minutes. During this time network switching functionality remains uninterrupted, but the unit is unmanageable. PoE
functionality remains active, but network traffic may be interrupted for several seconds.
Product configuration -
Go to
Product configuration
to download or upload a product configuration file. This functionality can
be used to backup unit configuration, modify unit configuration offline or to create a master configuration file to easily configure
several units.
14
