AXIS T8504–E Outdoor PoE Switch
General information
General information
Features
A number of features are provided through system network management.
•
Easy software update during runtime without affecting active PoE ports
•
Configuration and real-time monitoring using graphical representation of the remote device
•
System status display
•
SysLog reporting on PoE events, invalid remote user access, initial DHCPv4/v6 address etc.
•
SNMP traps reporting on various PoE events such as PoE powered device insertion or removal
Ethernet switch network capabilities
•
Four weather sealed RJ45 Ethernet ports capable of 10 Mbit, 100 Mbit, 1000 Mbit half-duplex and 1000 Mbit full-duplex
Ethernet speed
•
Single weather sealed SFP Ethernet port
•
8K internal MAC address lookup engine
•
VLAN — Access, Trunk and Filtered trunk
•
Auto MDIX
•
10KB jumbo frames
PoE capabilities
The following PoE options are available:
•
Two 4Pair PoE ports
which deliver up to 60 W per port
•
Two IEEE 802.3at PoE ports
which deliver up to 30 W per port
•
PoE enable/disable
to enable or disable PoE ports power output. Ethernet data is always enabled.
•
Remote device reset
to reset attached powered device. The device is temporarily powered off and then turned back on.
Supported network protocols
The following network protocols are supported:
•
IPv4
– 32–bit long IP address (static/DHCPv4)
•
IPv6
– 128–bit long IP address (static/DHCPv6)
•
VLAN
– Access, Trunk and Filtered trunk
User access and security
Access options
You can access the unit through different interfaces:
•
Web interface via a web browser
– to view the unit PoE status, network status, unit configuration and unit production
information
5
