manualshive.com logo in svg

Axis T8504-E, Руководство пользователя

Поделиться
Скачать
Axis T8504-E Скачать руководство пользователя страница 13

AXIS T8504–E Outdoor PoE Switch

Web interface

Parameter

Description

Enable notification

Enable or disable the following PoE trap reports:

• PoE power was provided/removed from powered device
• Unit total power consumption exceeds xy% out of max unit power
• Unit total power consumption was restored to less than xy% out of max

unit power

Notify exceeded power usage
(1–99%)

If enabled, user is notified whenever unit total power consumption (xy%) percentage out
of unit max power exceeds or drops below specified value.

SNMPv3

Parameter

Description

Enable SNMPv3

Enable or disable SNMPv3 support.

User name

Configure SNMPv3 username string.

Authentication password

Configure SNMPv3 password to be used by MD5/SHA.

Privacy password

Configure SNMPv3 password to be used by DES/AES.

Authentication and encryption mode

Configure the SNMPv3 authentication and encryption mode.
None — no authentication or encryption, which means no security.
MD5 — MD5 authentication with no encryption. Packet can be changed, by can easily be
analyzed by network sniffers.
SHA — SHA authentication with no encryption.
MD5+DES — MD5 authentication and DES encryption
SHA+DES — SHA authentication and DES encryption
MD5+AES — MD5 authentication and AES encryption
SHA+AES — SHA athentication and AES encryption

SNMPv3 notification (Trap)

Parameter

Description

User name

Configure SNMPv3 notification username string.

Authentication password

Configure SNMPv3 notification password to be used by MD5/SHA.

Privacy password

Configure SNMPv3 notification password to be used by DES/AES.

Authentication and encryption mode

Configure the SNMPv3 notification authentication and encryption mode.
None — no authentication or encryption, which means no security.
MD5 — MD5 authentication with no encryption. Packet can be changed, by can easily be
analyzed by network sniffers.
SHA — SHA authentication with no encryption.
MD5+DES — MD5 authentication and DES encryption
SHA+DES — SHA authentication and DES encryption
MD5+AES — MD5 authentication and AES encryption
SHA+AES — SHA athentication and AES encryption

Remote IPv4/IPv6 SNMP trap managers (v2c/v3)

Parameter

Description

Trap manager #1

Configure the first IPv4/IPv6/DNS name of remote SNMP manager server receiving unit
trap reports such as Cold-Start, etc.

Trap manager #2

Configure the second IPv4/IPv6/DNS name of remote SNMP manager server receiving
unit trap reports such as Cold-Start, etc.

13

Содержание T8504-E

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды