![Axis T8504-E Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/axis/t8504-e/t8504-e_user-manual_3039855008.webp)
AXIS T8504–E Outdoor PoE Switch
General information
PC IPv4 address: 192.168.0.40
PC IPv4 mask: 255.255.255.0
2. Connect your PC Ethernet network interface to any of the unit’s Ethernet ports.
3. Open a web browser and type 192.168.0.254 in the address field.
4. Log in with the default username and password. See
Default unit IP, username and password on page 6
.
5. Configure the unit. It is recommended to change the usernames and passwords to other than the default values.
Unit identification over IP network
To locate the unit over the IP network, the unit sends IPv4 SysLog message #0 in broadcast format 255.255.255.255 upon power-up.
Any SysLog server connected over LAN receives this SysLog message. The same SysLog message is also sent to the optional SysLog
servers 1 and 2, if they are configured.
The unit sends the message twice. This is to ensure that the SysLog message is received by the SysLog servers, regardless of network
configuration. The message is first sent before VLAN configuration is made and later again after VLAN configuration is done.
SysLog message #0 contains all the information which is required to be able to provide access to the unit over the network.
Example:
MsgID#000 - System UP. APP:v3.51.06 BOOT:v3.16 RST:Power-On BOOT:0=[APP
OK] Host:axis-00055A034B49 MAC:00:05:5a:03:4b:49 VLAN:YES VLAN_MNGR:5
VLAN_UPLINK_PORT:3 VLAN_UPLINK_MODE:TRUNK DHCPv4:No IP1v4:192.168.0.254/24 DHCPv6:No
IP1v6:2345::205:5AFF:FE03:4B49/64 IP2v6:FE80::205:5AFF:FE03:4B49/64
Field
Value
Description
MsgID#000 - System UP
SysLog message number
APP:
v3.51.06
Unit application software version
BOOT:
v3.16
Unit boot version, used for software
update
RST:
Power-On
Reset reason
BOOT:
0=[APP OK]
Host:
axis-00055A034B49
axis followed by unit MAC address
MAC:
00:05:5a:03:4b:49
Unit MAC address
VLAN:
YES
VLAN status enabled or disabled
VLAN_UPLINK_PORT:
3
Ethernet port number used for unit
management
VLAN_UPLINK_MODE:
TRUNK
Management port is configured as Access
or Trunk
DHCPv4:
No
DHCPv4 Yes or No
IP1v4:
192.168.0.254/24
Unit IPv4 address
DHCPv6:
No
DHCPv6 Yes or No
IP1v6:
2345::205:5AFF:FE03:4B49/64
Unit IPv6 address
IP2v6:
FE80::205:5AFF:FE03:4B49/64
Unit link-local IPv6 address
8