AXIS Q3538–SLVE Dome Camera
The device interface
Electronic image stabilization (EIS)
: Turn on to get a smoother and steadier image with less blur. We recommend you
to use EIS in environments where the device is mounted in an exposed location and subject to vibrations due to, for example,
wind or passing traffic.
Focal length
: Use the slider to adjust the focal length. A higher value leads to higher magnification and a narrower angle
of view, while a lower value leads to a lower magnification and a wider angle of view.
Stabilizer margin
: Use the slider to adjust the size of the stabilizer margin, which determines the level of vibration to
stabilize. If the product is mounted in an environment with a lot of vibration, move the slider towards
Max
. As a result, a smaller
scene is captured. If the environment has less vibration, move the slider towards
Min
.
Straighten image
: Turn on and use the slider to straighten the image horizontally by rotating and cropping it digitally. The
functionality is useful when it’s not possible to mount the camera exactly level. Ideally, straighten the image during installation.
: Click to show a supporting grid in the image.
: Click to hide the grid.
The image before and after it has been straightened.
Image
Wide dynamic range
WDR
: Turn on to make both bright and dark areas of the image visible.
Local contrast
: Use the slider to adjust the contrast of the image. A higher value makes the contrast higher between
dark and light areas.
Tone mapping
: Use the slider to adjust the amount of tone mapping that is applied to the image. If the value is set to
zero only the standard gamma correction is applied, while a higher value increases the visibility of the darkest and brightest
parts in the image.
White balance
16
