Axis Fixed Dome Network Camera AXIS P3301-V, Руководство пользователя

Страница: 26 / 49

AXIS P3301-V Fixed Dome Network Camera
Events
Events
The Axis product can be con fi gured to perform actions when different events occur, for example, start a recording when motion is
detected. The set of conditions that de fi nes how and when the action is triggered is called an Action Rule . The action rule will apply
at speci fi c periods called Schedules . It is possible to specify how often the action rule will recur. This is called Recurrences .
Available Action Rule triggers include:
• Detectors, for example audio detection and motion detection, see Detectors, on page 22
• Input Signal — when the product’s I/O port receives a signal from an external device, such as a smoke detector or switch
• Storage — when a storage device is available, locked or full
• System — when the product is started
• Time, see Recurrences, on page 27
Possible actions include:
• Output Port — activate an output to, for example, sound an alarm or lock a door
• Play Audio Clip
• Record Video — record video and save to a selected storage
• Send Images and Noti fi cations — once recipients have been set up, a noti fi cation can be sent that an event has occurred
• Status LED
Convert Event Types to Action Rules
The internal Event Management system has been redesigned from fi rmware version 5.40 . The legacy user Event Types in the
camera will continue to work but will not be visible in the user interface of the camera. The
Event Types need to be converted to
Action rules
to become visible in the user interface.
To convert
Event Types
to
Action Rules
go to
Events
>
Action Rules
and click
Convert
.
Caution
This is not recommended when using a VMS based on the old Event Management System.
Setting Up an Action Rule
An action rule de fi nes the conditions that must be met for the product to perform an action, for example record video or send email
noti fi cations. If multiple conditions are de fi ned, all must be met to trigger the action.
The following example describes how to set up an action rule to send an email if there is movement in the product’s fi eld of view:
1. Go to
Events
>
Action Rules
and click
Add
.
2. Select the Enable rule option and enter a descriptive name for the rule.
3. Select Detectors from the Trigger drop-down list.
4. Select
Motion Detection
from the drop-down list. This option is only available if a motion detection window has been
con fi gured, see page 23 .
5. Set one of the available pre-programmed time intervals from the
Schedule
drop-down list.
6. Select
Send Noti fi cation
from the
Type
drop-down list.
26