Axis Fixed Dome Network Camera AXIS P3301-V, Руководство пользователя

Страница: 8 / 49

AXIS P3301-V Fixed Dome Network Camera
Accessing the product
Access from the Internet
Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must
con fi gure your network router to allow incoming data traf fi c to the product. To do this, enable the NAT-traversal feature, which
will attempt to automatically con fi gure the router to allow access to the product. This is enabled from Setup > System Options >
Network > TCP/IP Advanced.
For more information, please see NAT traversal (port mapping) for IPv4, on page 35 . See also AXIS Internet Dynamic DNS Service at
www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com\techsup
Set the root password
To gain access to the Axis product, you must set the password for the default administrator user
root
. This is done in the
Con fi gure
Root Password dialog, which appears when the product is accessed for the fi rst time.
To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS
certi fi cate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traf fi c between web browsers and servers. The
HTTPS certi fi cate ensures encrypted exchange of information.
To set the password via a standard HTTP connection, enter it directly in the fi rst dialog.
To set the password via an encrypted HTTPS connection, follow these steps:
1. Click
Create self-signed certi fi cate
.
2. Provide the requested information and click OK . The certi fi cate is created and the password can now be set securely. All
traf fi c to and from the product is encrypted from this point on.
3. Enter a password and then re-enter to con fi rm the spelling. Click OK . The password has now been con fi gured.
Note
• The default administrator user name
root
is permanent and cannot be deleted.
• If the password for root is lost, the product must be reset to the factory default settings. See Reset to factory default
settings, on page 40 .
8