AXIOMTEK NA-1301, Руководство по установке оборудования

Страница: 31 / 55

NA-1301 Network Appliance Server Hardware Installation Guide
3.6 Installing Display Interface
3.6.1 CRT Interface Controller
The built-in ATI Rage XL is a high-performance super VGA display controller with onboard 8M bytes
VGA RAM. It is capable of driving a wide array of CRT displays. It can also support CRT at a maximum
resolution of up to 1600x1200 with 16-bit colors.
The software solution provider can see the software progress status through VGA display by its header
of the main board.
3.6.2 Features
Fully compatible with IBM

VGA
CRT monitor can be displayed simultaneously
Onboard 8M bytes VGA SDRAM
Supports non-interlaced CRT monitors with resolutions up to 1600x1200
16-bit colors
Direct interface to Color and Monochrome Dual Drive and Single Drive panels
SMARTMAP

intelligent color to gray scale conversion enhances text legibility
Integrated programmable linear address feature accelerates GUI performance
Hardware W indows acceleration
3.6.3 VGA Connectors
The main board support CRT VGA displays, individually or simultaneously. CN13 is a 16-pin pin
header connector commonly used for the CRT VGA display connection.
Attention: You can find out this VGA cable through cable kit in the default package.
CN13: CRT/VGA Connector Pin Assignment
Pin Signal Pin Signal Pin Signal
1 Red 2 AGND 3 Green
4 N/A 5 Blue 6 AGND
7 N/A 8 DDC
DAT
9 GND
10 AGND 11 GND 12 Horizontal
Sync
13 AGND 14 Vertical
Sync
15 DDC CLK
16 No
connecto
r
2
4
6
1
3
5
7
8
9
11
13
15
10
12
14
16
3.7 Installing Serial Port Interface
The serial interface onboard consists of COM1 port (CN8) and COM2 (CN7) supports RS-232/422/485
Hardware Description
26