NA-1301 Network Appliance Server Hardware Installation Guide
4.6 Integrated
Peripherals
This option sets your hard disk configuration, mode and port.
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
On-Chip Primary PCI IDE
Enabled
Item Help
IDE Primary Master PIO
Auto
IDE Primary Slave PIO
Auto
Menu Level
IDE Primary Master UDMA
Auto
IDE Primary Slave UDMA
Auto
On-Chip Secondary PCI IDE
Enabled
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
IDE Secondary Master UDMA
Auto
IDE Secondary Slave UDMA
Auto
USB Controller
Enabled
USB 2.0 Controller
Enable
USB Keyboard Support
Disabled
USB Mouse Support
Disable
IDE HDD Block Mode
Enabled
POWER ON Function
BUTTON ONLY
KB Power On Password
Enter
Hot Key Power On
Ctrl-F1
Onboard Serial Port 1
3F8/IRQ4
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
RxD, TxD Active
Hi, Lo
PWRON After PWR-Fail
Off
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit
F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
On-Chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with support for two IDE
channels. Select
Enabled
to activate each channel separately.
The choice: Enabled, Disabled.
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each
of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4
provide successively increased performance. In Auto mode, the system automatically
determines the best mode for each device.
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (W indows 98 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33,
select Auto to enable BIOS support.
The Choice: Auto, Disabled.
USB Controller
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you
have USB peripherals.
The choice: Enabled, Disabled.
USB 2.0 Controller
Select Enabled if your system contains a Universal Serial Bus V2.0 (USB2.0) controller
Power Supply Specifications
40
Содержание NA-1301
