2016-01-11 | © AXING AG Schweiz | Subject to change in design and type; errors and misprints reserved
17
3.3.
Initialization phase 2
3.3.1.
REMUX- and CROSS MULTIPLEX MODE
In the program table, the found programs are subdivided by tuner, and the program name and other
information are shown.
All lines of the program table have in the "Modulator" column four colored buttons M1 to M4. The buttons
correspond to the four modulators. The allocation of the buttons is given in the COLOR CODES legend.
When the modulator button is clicked on, the program is assigned to the modulator. The button of the
modulator is highlighted in color.
A new click allow the assignment to be canceled. The modulator buttons fades then again.
As long as no assignment has been done, the output channels of the modulators still have no program.
In the window TRANSPORT STREAM and NETWORK, you can find out in which mode the module works.
REMUX MODE:
If the transport stream IDs of the four modulators and the network ID are set on "auto", the module works in
the REMUX MODE.
In this mode, the IDs from the set transponder and from the satellite are used and forwarded to the modulators
with virtually no changes.
Every tuner is assigned to a modulator. The programs of the tuner can only be assigned to the associated
modulator.
