2016-01-11 | © AXING AG Schweiz | Subject to change in design and type; errors and misprints reserved
13
3.1.
Login and logout
The web-based user interface is protected against unauthorized access.
When accessing the user interface, the first thing is the password request.
Enter the default password:
Ramsen8262
Click the button
ENTER PASSWORD
.
If you are not automatically forwarded to the start page,
click then the button
OPEN PAGE
.
In the header, the user can choose the language of the user interface. The possibilities are German (DE) and
English (EN). The standard language of the user interface is English. The chosen language applies until the end
of the session.
To log out, click the button
LOG OUT
in the header of the website. In the browser, the message "Goodbye!“
appears
.
If the browser is closed while you are still logged in, an automatic logout occurs 2.5 minutes later.
If the browser window stays open, there is no automatic logout. It allows monitoring the installation via the
web browser.
Changing the password:
Please change the password immediately after the first commissioning and choose a sufficiently safe password.
Keep this password at a safe place.
You can change the password via the menu item:
Maintenance
>
Set new password.
For a detailed description of how to change the password, see chapter 3 section 5.33.
Changing the IP address:
If needed, the modules can be integrated in a network. For this application, some changes must be applied to
the network configuration.
In the menu item
Maintenance > System Options
, you can change the required settings: IP address, subnet
mask and standard gateway.
For a detailed description of the network configuration, see chapter 3 section 5.22.
Start page
The relevant information required for a perfect function of the system are shown on the start page. The
decisive thing is the quality of the input signals and the utilization of the modulators.
The bit error rate of all four SAT IF tuners is shown on the left side. The amount of bit errors for the last
1,000,000 transferred bits is calculated.
The fill level of all four modulators is shown on the right side.