Operation instructions | SKT 40-00 | SKT 80-00 | 8PSK/QPSK | COFDM Quattro/Octo Module
22
2016-01-11 | © AXING AG Switzerland | Subject to change in design and type; errors and misprints reserved
3.5.
Maintenance
The menu entry
Maintenance
enables software updates, changing the IP address, changing the password,
restarting the module and erasing service data.
Important:
If you stay on the maintenance page for more than 2.5 minutes, an automatic logout will occur
and you will have to repeat the login procedure.
3.5.1.
Updating firmware/software
New firmware can be installed under
Firmware File
and new software for the interface can be installed under
Software File
.
Firmware and software updates are available at
www.axing.com
under
Download
.
The module will be automatically rebooted after an update. The set parameters will not be lost after an update.
3.5.2.
Changing the IP address
The IP address, network mask and the gateway can be changed in the menu entry
Maintenance > System
Options
. The
SAVE CHANGES
button confirms and saves the changes.
When the IP address has been changed, the device will boot automatically and the new IP address will be
entered in the web browser. When complete, the enter password site will be displayed.
