14
: L
og
s •
7
3
© 2017 Telos Alliance - Rev 1.2
Finally, you need to use the selection window at the bottom of this dialog to select what log options you wish to log.
Expanding the tree in this window will present checkboxes for the items you wish to log. The available items are:
• AudioAlarms
»
AlarmState: Generates a log message whenever an audio alarm state changes.
»
LvlState: Generates a log message whenever the audio threshold for silence is passed for longer
than 250 ms. This occurs before the countdown to an alarm state begins. It can be used to log the
actual transitions being reported by the equipment but may also generate a large amount of log con-
tent depending on the type of audio content being monitored.
• ConnectMessage
»
Connected: Logs connections and disconnections from equipment. Use this log message to find
equipment with which Pathfinder Core PRO is struggling to maintain a connection.
• Devices
»
VMIXGain: Logs changes to VMIXer gain settings.
»
VMIXState: Logs changes to VMIXer On/Off settings.
• LegacyPanels
»
PanelPropertyChanged: Logs changes to properties of any of the controls in user panels.
• LogicFlows
»
CombinerOutputChanged: Logs changes whenever a logic flow translator changes its output.
»
TranslatorOutputChanged: Logs changes whenever a logic flow translator changes its output.
• MemorySlots
»
MemorySlotChanged: Logs whenever a memory slot changes its value.
• RouterEvents
»
GPIO State: Logs changes to GPIOs within the system.
»
RouteState: Logs any route changes that take place within the system.