1: Qu
ic
ks
ta
rt •
2
© 2017 Telos Alliance - Rev 1.2
Using the IEC cables supplied, connect the Pathfinder Core PRO’s power supply input to AC mains.
Once Pathfinder Core PRO has booted, its display will show the OK logo along with the default IP address shipped
from the factory.
You will need to enter the IP address, netmask, and gateway you wish to use for the system. To do this:
1. Tap the rotary encoder on the front panel, once. A menu view will appear.
2. Rotate the encoder to highlight “Livewire (Lan) Interface”, and tap the encoder again to select it. A new
menu will appear.
3. Tap the encoder to enter the “IP Address” setting.
4. Rotate the encoder to move the onscreen cursor. A tap on any of the cursor positions allows you to edit its
numeric value; rotate the encoder to increment or decrement the value and tap to accept the change. Repeat
this until the IP address you desire is entered. When you scroll beyond the last digit of the IP address the
system will return to highlighting the main menu items.
5. Rotate the encoder to highlight “Netmask”, and tap the encoder to select it. Rotate the encoder to scroll
through the possible Netmask settings. Tap the encoder again to return to the main menu items.
6. Rotate the encoder to highlight “Gateway”, and tap the encoder to begin changing the gateway settings.
Repeat the steps you used to set the IP address to set the Gateway address.
7. Once the gateway has been set, rotate the encoder again to highlight Save, and tap the encoder to save the
“Livewire (LAN) Interface settings.
8. Rotate the encoder to “WAN Interface” and repeat the procedures above to set the WAN IP address.
