Axell BSF-3302 61-200001 Series Repeater
Product Description and U
ser’s Manual
© Axell Wireless Ltd
Doc. No. PN 3302 61-200001 Series-UM Rev. 1.0
55
To activate the BSF-3302 SNMP Agent
1.
Click on the
Config
button (top right corner) and select
SNMP Agent Config.
The following
pane appears:
2.
Set the
SNMP Agent
toggle to
ON
.
3.
Set the
port
and the
Read-Only community
.
4.
Click
Apply
.
6.6
User Accounts
The BSF-3302 comes pre-configured with default usernames and passwords in various
administration levels.
At the moment, updating user accounts is available only via Command Line Interface (CLI) or Axell
Shell. See the Common Commands and Attributes v2.0.0 document for detailed commands and
syntax or click on the
Help
button at the top right of the Web-GUI screen.
6.6.1 Default User Accounts
User Name Default
Password
Details
axell
AxellPasswd
Default user name.
omcuname
iwnkhoob
Axell Element Manager (AEM) user account. This
account will not generate VLI, LGO or CLR alarms.
sysadmin
AxellAdmin4050
This is the system administration password which is used
for firmware upgrades and user administration.
Escalation to this level is achieved by issuing command
SYSADMIN from the user prompt.
useradmin
UseradminPwd23
This account contains user administration privileges.
Escalation to this level is achieved by issuing command
USERADMIN from the user prompt.
Avitec
AvitecPasswd
Account available for compatibility reasons with older
system firmware.
NOTE: It is strongly recommended to change the default user names and passwords immediately
at commissioning. This is done by using the command
ACT PASSWORD
. Please refer to
the User Administration section in Common Commands and Attributes document for
detailed syntax.
