Axell BSF-3302 61-200001 Series Repeater
Product Description and User’s Manual
© Axell Wireless Ltd
Doc. No. PN 3302 61-200001 Series-UM Rev. 1.0
54
6.5 SNMP Support
The BSF-3302 includes SNMP support, including an SNMP Agent and SNMP traps (alarms). All
SNMP queries and traps are supported either via the OMU II or a direct connection to the unit.
6.5.1 SNMP Traps Parameters
The BSF-3302 sends SNMP traps to user defined destination addresses.
NOTE: One destination address can currently be defined via the Web. Seven more destination
addresses can be defined via the Axell Shell.
To configure the SNMP traps destination address
1.
Click on the
Configure
button (top right corner).
2.
Select
Remote Communication
.
3.
In the
Device:Method
field, select
ETH:SNMP
4.
Define the SNMP trap destination IP address (additional addresses can be defined via the
Axell Shell.).
5.
Enter the (destination address device) Trap Port and its Community parameters.
6.
Click
Apply
.
6.5.2 Activating and Configuring the SNMP Agent
The SNMP agent provides inventory management for hosted repeaters (on which the SNMP agent
is enabled) and a table of active alarms in the controller or fiber system for remote querying.
The SNMP Agent is responsible for responding to queries and carries out requests. The SNMP
Agent also provides the proprietary Axell MIB (AXELL-AM-MIB), accessible via any SNMP
manager (e.g. HP OpenView).
All SNMP queries to the remote are implemented via an OMU session.
To allow SNMP agent queries
●
To allow SNMP queries of the OMU II
– the SNMP agent must be enabled on the OMU II.
●
To allow SNMP queries of the remote devices via OMU II
– the SNMP agent must be
enabled on the OMU II
and
on the remote devices.
●
Remote units configured with an IP address and connected to the communication
infrastructure, can be queried directly.
