Axell BSF-3302 61-200001 Series Repeater
Product Description and U
ser’s Manual
© Axell Wireless Ltd
Doc. No. PN 3302 61-200001 Series-UM Rev. 1.0
35
5
BSF-3302 Commissioning
After the repeater is connected, it is identified by the OMU II via the fiber connection and the unit is
commissioned from the OMU II. The commissioning process consists of a few simple steps.
To commission the BSF-3302 - overview:
1.
Open an
OMU II session
. This is used to access the BSF-3302 configuration window (via
OMU II).
2.
Perform
Optical Loss Adjustment
.
3.
Set the required
RF attenuation and gain levels
4.
Assign the unit a
recognizable name
(according to its location).
5.1 Open a Session to the BSF-3302 via the OMU II
1.
Open a local or remote session to the host OMU II:
●
Remote session
– open a Browser session in the same subnet as the host OMU II and
enter the IP of the host OMU II (see OMU user manual for detailed procedure). Enter the
OMU II User Name (e.g.
axell
) and Password (provided by your system administrator).
●
Local session
– connect to the OMU II Control Module's USB or Ethernet ports. Enter the
OMU II User Name (e.g.
axell
) and Password (provided by your system administrator).
●
After accessing an OMU II session, commission the BSF-3302 according to the following
section.
Figure 5-1: Connection to OMU II
Connect to
either
the USB port
or
the Ethernet port
