AWH TANKO JM100 Скачать руководство пользователя страница 75

Страница: 75 / 104

Jet Cleaner TANKO-JM

7 Maintenance

Translation of the original Operating / Installation Instructions 2016/12

65/90

7.4.4.1

Assembling the JM100 Device

The item numbers shown in brackets refer to the

Figure 7.5-1: Internal construction of

the

JM100-G22

The tightening torque values for the screw connections required for assembly are listed in the

Table 7.5-1: JM100 tightening

torque values

1) Assembly - Cleaning Head

1. Press collar bushings for nozzle carriers (04) into the axle bore of the bevel gear wheels with nozzle

carrier (14).

2. Insert the circlip (17) into the internal groove of the bevel gear wheel with nozzle carrier (14) and

allow it to engage in place.

3. Press jet concentrators (07) in all nozzles (06) and check that they are firmly in place.

4. Clamp the bevel gear wheel with nozzle carrier (14) in the vise.

5. Screw and tighten nozzles (06) in the bevel gear wheel with nozzle carrier (14).

6. Remove the screwed parts from the vise.

7. Slide bevel gear wheel with nozzle carrier (14) on the axle for nozzle carriers (13).

8. Clamp the axle for the nozzle carrier (13) in the vise.

9. Screw and tighten the locking screw (18) in the axle for nozzle carriers (13).

10. Check to see if the bevel gear wheel with nozzle carrier (14) is rotating freely on the axle for nozzle

carriers (13).

2) Assembly - Actuator Unit Assembly Unit

1. Press collar bushing for housing (03) with collar up to the stop into the bore housing (02).

2. Slide the sliding disk (05) onto the rotor shaft (10).

3. Clamp the axle for nozzle carriers (13) at the flat surfaces together with the assembled bevel gear

wheels with nozzle carrier (14) in the vise.

NOTE

To ensure that the device functions securely, the position of the nozzles on the opposite

nozzle carriers with respect to one another must be observed at the time of assembly!



Align the nozzles (06) the opposite bevel gear wheels with nozzle carrier (14) perpendicular to
one another so that the axles of the nozzles (06) form a cross and are in horizontal/vertical
position with respect to the housing (02).

5. Slide the rotor shaft (10) with sliding disk (05) from the interior of the housing (02) outwards

through the collar bushing for the housing (03).

6. Screw the rotor shaft (10) into the axle for nozzle carrier (13) and tighten it with a socket wrench.

7. Screw the rotor star wheel (11) auf the rotor shaft (10) and tighten it with the assembly/disassembly

tool for the rotor star wheel.

8. Remove the screwed parts from the vise.

Содержание TANKO JM100









































































































Результаты поиска

Содержание TANKO JM100

Отзывы:

AWH TANKO JM100, Руководство по эксплуатации и установке, Страница: 75 / 104

Результаты поиска

Содержание TANKO JM100

Отзывы: