AWH TANKO JM100, Руководство по эксплуатации и установке, Страница: 48 / 104

Jet Cleaner TANKO-JM
38/90 Translation of the original Operating / Installation Instructions 2016/12 5 Installation
Interface B
The connection to the container must be designed to that it is compatible with the process connection
[PC] for the downpipe [DP]. The process connection [PC] must be fastened permanently and leak-tight
to the connection on the container (e.g. screwed or clamping) and secured to prevent it from coming
loose.
WARNING
NON-threaded process connections [PC], e.g. detachable connections with a clamp or
catch design, may come loose unintentionally!
There is a risk of fluids getting in or spraying out (carryover of zones).

Process connections [PC] with a clamp or catch design must:
– be self-locking (e.g. mechanical locking with safety lock) or
– provided with an additional securing mechanism to prevent them from coming loose accidentally.
The operating company is solely responsible for fastening the device to the container.
Interface C
NOTE
Excessively small installation openings on the container or components (e.g. agitators) in the
container! Nozzles collide during installation!
Damage to the device. The nozzle carrier may come loose.

The nozzles must NOT collide!
1. Check the following before inserting the device into the container:
–
The minimum dimension for the installation opening (see section 3.3 Technical Data ),
– Presence of interfering contours on surrounding components in the container and
–
That the nozzle carrier with nozzles is firmly in place on the cleaning head.
2. Insert the device into the container through the installation opening with the utmost care.
NOTE
“
Installation opening - stationary device
”

Before installation, align the position of the nozzles if necessary by rotating the cleaning
head/nozzles.

Fasten the cleaning head/device inside the container.
– Provided that proper installation and assembly/removal of the cleaning head/device inside the
container is assured and
– The diameter of the installation opening on the container is at least 5 mm greater than the outer
diameter of the downpipe [DP].
NOTE
“
Installation opening - mobile device
”
Smaller installation openings on the container
“
for mobile use
”
of the device, as specified in
section 3.3 Technical Data , are permitted only:

If the cleaning head fits through the installation opening with the nozzles in any position during
installation and removal of the device (e.g. by using shorter nozzles) and

a safety clearance of at least 5 mm all around the device between the device and the installation
opening is ensured.