Avtron K922A, Руководство пользователя

Страница: 15 / 90

Installation
Avtron Outdoor Resistive Load Bank • Part Number K922AD41523
3-3
W A R N I N G
Personal injury from electrical shock may result if all sources of
power are not disconnected before servicing. Maintenance work
must be done only by qualified personnel.
Failure to follow these guidelines will void the warranty.
*************************************************************
INSTALLATION
NOTE
Review reference drawing SB3671 while reviewing
INSTALLATION section.
The following steps outline the recommended sequence for the installation of the K922A Load
Bank. The installation procedure defined below describes the handling (rigging) and physical
mounting of the Load Bank. All load and control wiring is provided by the installing contractor or
site technicians/operator. No special hand tools are required for installation. It is the responsibility
of the installing contractor or site technicians/operator to ensure all local laws, rules and regulations
are followed for the installation procedure. All laws, rules, and regulations take precedent over this
procedure.
*************************************************************
W A R N I N G
To prevent injury or death to personnel, never place any portion of
body under the Load Bank while rigging. These procedures are
guidelines only and do not fully detail the scope of work required for
complete installation. The rigger (installing contractor, site
technician, operator) and his equipment must meet all safety and code
regulations.
*************************************************************
PREREQUISITES TO HANDLING