FREQUENTLY-USED FUNCTIONS
16
5. FREQUENTLY-USED FUNCTIONS
5.1 IP Device Search
On the recorder’s live view, choose
MENU
CAMERA
CONNECTION
to go to the setting page. For the
channel to which you want to connect the IP camera, change the interface from
COAXIAL
to
IPCAM
.
CONNECTION
CHANNEL
TITLE
INTERFACE EDIT
ENABLE URI PORT
DEVICE
TYPE
VENDOR MODEL STREAM
PROTOCOL
METHOD PATH1 PATH2
CH1 IPCAM
192.168.1.11 88 IPCAM AVTECH RTP-Unicast TCP
CH2 IPCAM
CH3 COAXIAL
CH4 COAXIAL
IP
SEARCH
Choose
IP SEARCH
to go to the
IP SEARCH
page directly and start searching the connected IP cameras.
You’ll see the list of every connected IP camera with its connection status to this device and MAC address. Click
to assign the camera to the channel automatically and choose
ADD
to complete.
IP SEARCH
ASSIGN
EDIT
DEVICE TYPE
IP
NETMASK
GATEWAY
PRIMARY DNS
PORT
MAC
VENDOR
CH1
IPCAM 192.168.1.11
255.255.255.0
192.168.1.1 8.8.8.8 88
00:0E:53:31:06:E5
AVTECH
IPCAM 192.168.1.11
255.255.255.0
0.0.0.0 8.8.8.8 88
00:0E:53:31:06:E5
ONVIF
IPCAM 192.168.1.12
255.255.255.0
192.168.1.1 8.8.8.8 88
00:0E:53:31:15:D1
AVTECH
IPCAM 192.168.1.12
255.255.255.0
0.0.0.0 8.8.8.8 88
00:0E:53:31:15:D1
ONVIF
REFRESH ADD
Make sure the IP address of the connected camera is in the network segment the same as your router uses.
If not:
For our brand’s IP camera, select
and change the network type from
STATIC
to
DHCP
. Then, click
APPLY
to save your changes.
SETUP
NETWORK TYPE
DHCP
IP
192.168.1.11
PORT
88
USER NAME
admin
PASSWORD
*****
NETMASK
255.255.255.0
GATEWAY
192.168.1.1
PRIMARY DNS
8.8.8.8
CANCEL
APPLY
For other brand’s IP camera, please check its user manual to manually change its IP address.