MAIN MENU
36
6.5.3 REGULAR REPORT
This function is used to send event reports to the specified E-mail address. Users could configure up to 5
profiles to receive different reports about specific channels at different time.
Note:
This function is available only when a hard disk is installed, and the recorder is connected to
Internet.
You can configure up to 7 profiles and use one of them as your backup preference.
BACKUP
SOURCE
DESTINATION
PROFILE
PROFILE1
EVENT
TYPE
4
SELECTED
ACTIVE
ON
EXECUTION PERIOD
WEEKLY
EDIT
ADDRESS
EXECUTION DAY OF WEEK
MON
EXECUTION HOUR
1
CHANNEL
√
ALL
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
APPLY
Step1: In
SOURCE
, choose the profile you’d like to save all the settings configured in
SOURCE
.
Choose how often and when you’d like to receive reports. Finally, make sure this profile is active
(
ACTIVE
to
ON
).
EXECUTION PERIOD
Select how often you want to receive reports:
MONTHLY
,
WEEKLY
or
DAILY
.
EXECUTION DAY OF MONTH
/
EXECUTION DAY OF WEEK
Depending on the option you selected in
EXECUTION PERIOD
:
EXECUTION DAY OF MONTH
shows when
MONTHLY
is selected.
Select one date from 1 ~ 31 to reboot.
EXECUTION DAY OF WEEK
shows when
WEEKLY
is selected. Select
one day from Monday ~ Sunday to reboot.
Step2: In
CHANNEL
, choose the channel(s) you want.
Step3: In
DESTINATION
, choose which event type(s) you want to see (
MANUAL
/
MOTION
/
ALARM
/
SYSTEM
/
TIMER
/
HUMAN DETECTION
).
Step4: Click
to manually add an Email address to receive reports or
to select from the E-mail address
list pre-defined in
NETWORK
,
to modify the selected Email address, and
to remove
the selected Email address from the recipients list.
Step5: Click
APPLY
to confirm.
