MAIN MENU
26
6.3 SCENARIO
(For selected models only)
This function allows you to customize a series of actions which will be run automatically after the specified event
occurs.
Several scenario rules are pre-defined for you to quickly choose and apply. If none of these rules are suitable for
you, you can choose
to create your own rule from several scenario templates.
SCENARIO
EDIT NAME
TRIGGER
ACTION
TIMER
STATUS
MOTION RECORD
ALL CHANNELS
START RECORDING EVENT CHANNEL
OFF
ALARM RECORD
ALL CHANNELS
START RECORDING EVENT CHANNEL
OFF
GUARD RECORD
GUARD
START RECORDING ALL CHANNELS
ON
PUSH VIDEO NOTIFICATIONS (PIR)
GUARD,MOTION(CH1), PIR(CH1)…
PUSH VIDEO TO SEE PLAYBACK
ON
PUSH VIDEO NOTIFICATIONS
(ALARM)
GUARD,MOTION(CH1),ALARM(CH1)…
PUSH VIDEO TO SEE PLAYBACK
ON
MANUAL RECORD
START RECORDING ALL CHANNELS
EVERYDAY
ON
PUSH STATUS
ALL SYSTEM STATUSES
PUSH STATUS
EVERYDAY
ON
EVENT POP-UP ON LIVE MONITOR
(MOTION & ALARM)
MOTION(ALL CHANNELS),ALARM(ALL
CHANNELS)
POP UP EVENT ON LIVE MONITOR
ON
GUARD ON (MOTION DETECTION)
GUARD
ON
GUARD ON (PIR DETECTION)
GUARD
ON
GUARD OFF (MOTION
DETECTION)
GUARD
ON
GUARD OFF (PIR DETECTION)
GUARD
ON
EVENT POP-UP ON EVENT
MONITOR (MOTION & ALARM)
MOTION(ALL CHANNELS),ALARM(ALL
CHANNELS)
PLAYBACK VIDEO ON EVENT MONITOR
ON
6.3.1 Pre-defined Scenarios
There are 13 pre-defined scenarios for you to quickly enable the recording and notification functions which are
used frequently.
Note:
All pre-defined scenarios are not editable. If any changes should be made to suit your need,
please add a scenario rule manually.
1) MOTION RECORD
All channels are selected in this rule. The recorder starts recording the channel which has a motion event.
Scenario template used:
ONE OF (EVENT) TO (RECORD)
.
2) ALARM RECORD
All channels are selected in this rule. The recorder starts recording the channel which has an alarm event.
Scenario template used:
ONE OF (EVENT) TO (RECORD)
.
Note:
The alarms here refer to the alarm devices connected to the cameras or the recorder. For the
alarm events triggered by the PIR sensor built into the camera, please choose PIR instead.
3) GUARD RECORD
When
Guard
is enabled from EagleEyes, our mobile app, the recorder starts recording all channels.
Scenario template used:
ONE OF (EVENT) TO (RECORD)
.
4) PUSH VIDEO TRIGGERED BY BUILT-IN PIR SENSOR
When motion & PIR events occur simultaneously, you’ll receive Push Video on your mobile device.
Scenario template used:
ALL OF (EVENTS) TO DO (ACTION) AND THEN (ACTION)
.
Note:
To know how to enable Push Video, please refer to “APPENDIX 2 PUSH VIDEO CONFIGURATION”
at page 55.
