CONNECTION
4
Step6: Power on the recorder and wait till the initialization is completed. Check if the HDD indicator on the front panel
is flashing in red, meaning the system is detecting the hard disk now, and wait till the indicator is flashing in
green, meaning the hard disk is mounted.
Note:
Please check “HDD Indicators” in “1.1 Front Panel” for details.
Then, right click the mouse to exit from the full screen mode. Click
MENU
→
STORAGE
to see if all hard
disks you inserted are detected, and the status shows
READY
. Click
to clear and format your hard disk.
For details, please check “6.6 STORAGE” at page 37.
2.2 Camera Connection
Install the camera on the wall or ceiling based on your installation environment and camera type. For installation
details, please refer to the user manual of your camera.
2.2.1 HD CCTV camera & our brand’s speed dome camera
Step1: Connect the coaxial cable to the recorder.
Step2: Get a regulated adapter to connect the camera and power it on.
2.2.2 Other brand’s speed dome camera
Note:
The recorder must support RS485 connection to connect a speed dome camera. Please check the
specifications of your recorder for details.
Step1: Connect the coaxial cable to the recorder.
Step2: Find where the connectors of RS485-A and RS485-B are located on the recorder rear panel, and follow the
instructions of your camera manual to connect to the recorder. Then, power on the camera.
Step3: On the recorder side, right click to show the main menu, and go to
MENU
→
PERIPHERALS
DEVICES
to set the camera.
a) Select the device to
PTZ
.
b) Set the ID to the value the same as the one set in the camera.
c) Select the protocol to
P-P
,
P-D
,
S-T
or
S-E
.
Note:
P-P
and
P-D
are protocols used Pelco, and
S-T
and
S-E
are protocols used by Samsung.
d) Set the baud rate to the value the same as the one set in the camera.
e) Set the interface to
RS485
.
LOCAL
DEVICES
JOYSTICK
DEVICES
CHANNEL
TITLE
DEVICE
ID
PROTOCOL
RATE
INTERFACE
CH1
PTZ
1 P-P
9600
RS485
CH2 PTZ
0 NORMAL
2400
COAXIAL
CH3 PTZ
0 NORMAL
2400
COAXIAL
CH4 PTZ
0 NORMAL
2400
COAXIAL
