AVL Looms A Series, Инструкция по сборке

Страница: 20 / 176

Frame Assembly A-Series Dobby Loom Assembly Manual
Page | 12 Loom Orientation
L
OOM
O
RIENTATION
Before you get started, please take a minute to familiarize yourself with how
we describe the loom in this manual.
The front of the loom is where you will sit; the back of the loom is where the
warp beam is.
Everything is referenced as if you were sitting in the weaving position. The
right side of the loom is the side to your right as you are sitting at the loom
and the left side is to your left. A piece marked “bottom” would go toward
the floor.
On some drawings, we have included a “weaver symbol” to help clarify the
view of the drawing. This symbol shows a weaver seated at the weaving
bench. The symbol is included only to help clarify the orientation of the
drawing.
In this example, the weaver is sitting looking toward the right of the page.
That would indicate that the front of the loom is to the left of the page and
the rear of the loom to the right. If the arrow were pointing left, then the
rear of the loom is to the left.
The right and left of the dobby head is referenced as if you were standing
right in front of it.
T
OOLS
N
EEDED
F
OR
A
SSEMBLY
There are a few tools you’ll need before we can get started. These are:
 Philips head screwdriver
 Light hammer
 Pair of pliers
 4" or 6" crescent wrench
 Measuring Tape (for squaring the loom)
 Small Level (for leveling the loom)
 Scissors or Box cutter (for removing packing materials)
 Ratchet/Socket set (optional)