22
2.4.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons are visible,
the Cursor appears at the selected point on the map. AZ291MA displays the Cursor with a radiating
red dot (
) to make it visible at all zoom levels, even when it is in the background of a 3D map
view.
When the Cursor is set, tap
. The Cursor menu appears and you can use the Cursor as one of
the following:
•
the start point of a route
•
a via point in a route
•
the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
•
a
Favorite
•
a Road Safety Camera
•
a
POI
•
a map marker Pin
2.4.2.4 Original position in the Cursor menu
When the Cursor menu is open, a special icon (
) shows the Cursor position the menu was
opened with.
You can move and zoom the map, and you can set the Cursor to a different place. The usual Cursor
(
) appears, and the buttons of the Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap
. The map jumps back to the position with which the
Cursor menu was opened, and the
icon appears again.
2.4.3 Daytime and night color profiles
AZ291MA uses different color profiles during the day and during the night.
•
Daytime colors are similar to paper road maps.
•
The night color profiles use dark colors for large objects to keep the average brightness of the
screen low.
AZ291MA offers different daytime and night color profiles. It can also switch automatically between
the daytime and the night schemes based on the current time and GPS position a few minutes before
sunrise, when the sky has already turned bright, and a few minutes after sunset, before it becomes
dark.