Avidyne IFD510 Скачать руководство пользователя страница 192 | Manualshive

Страница: 192 / 474

Avidyne IFD510 Скачать руководство пользователя страница 192

IFD500 Series Pilot Guide

4-36 Map Subsystem

lines only show direction, they do not convey any speed information
about the sensed traffic’s speed.

Non-TA Traffic Range Filter

TA and PA traffic is always displayed on the map. However, to avoid
dis

play clutter at wide map zoom ranges, “other” and “ground” traffic

is defined as a map layer that can be turned off. The “Non-TA
Traffic” map layer is part of the Map settings on the Setup Page (see
page 5-62) and can be turned on or off. If the layer is on, then the
range below which the traffic will be displayed is also configurable.

Setup Page Non-TA Traffic Layer Item

Traffic Thumbnail Datablock

For space reasons, the Traffic Thumbnail datablock does not show
the traffic ID or ADS-B HVV barbs. TAs which are beyond the range
of the traffic thumbnail will display as a half symbol at the edge of the
thumbnail’s outer range ring. The traffic thumbnail is always
displayed with the ownship heading up (HDG) for TAS and TCAS
sensors. For ADS-B and TIS-B, the traffic thumbnail may be
displayed as track-up (TRK) if heading is not available.

TAS Traffic

ADS-B Traffic

Traffic Thumbnails

Traffic Advisories (TA) will generate a CAS message. Depending
upon the type of traffic system installed, an aural alert may also be
generated.

«
...
190
191
192
193
194
...
»

Содержание IFD510



























































































































































































































































































































































































































































































Отзывы:

Нет отзывов