Avidyne IFD510 Скачать руководство пользователя страница 148

Страница: 148 / 474

IFD500 Series Pilot Guide

3-58 FMS Subsystem

WPT (USER WAYPOINTS) TAB

The WPT tab will list all user waypoints in the IFD. Up to 500
user waypoints can be stored and accessed on this page.

User Waypoints Tab

CREATING A USER WAYPOINT

There are 4 methods of creating a user waypoint from the “WPT”
tab of the FMS page:



Present Position

– Press the “PPOS” LSK to create a

waypoint at the current aircraft position. No further action
is required.



Enter Lat/Lon

– Press the “New” LSK then press the

“Format” LSK until the “Lat/Lon” option appears. Enter
the waypoint coordinates and then p

ress the “Enter” LSK

to save the waypoint.



Enter Radial/Radial (an intersection of two radials)

–

Press the “New” LSK then press the “Format” LSK until
the

“Rad/Rad” option appears. Enter the fixes and

radials. Then p

ress the “Enter” LSK to save the

waypoint.

Содержание IFD510



























































































































































































































































































































































































































































































Результаты поиска

Содержание IFD510

Отзывы:

Avidyne IFD510, Руководство пилота, Страница: 148 / 474

Результаты поиска

Содержание IFD510

Отзывы: