Avid Technology S4, Руководство по установке

Страница: 31 / 60

Chapter 4: Hardware Assembly 25
To install Fill Panels:

Unpack the Fill Panel packages, and install them to cover any empty slots. Fill Panels slide into place, just like modules. Refer
to the following diagram for example placement of Fill Panels.
Gaps remaining above Fill Panels and modules are filled with Compression Panels, as explained in the next section.
Installing Compression Panels
After you have installed all modules and covered empty slots with Fill Panels, install Compression Panels at the top of each chassis.
Compression Panels are spring-loaded panels that seal the top of each chassis and hold the modules in place. Compression Panels
come in three sizes for S4:
CSM
For sealing CSM chassis (1x included in each CSM package)
Channel
For sealing Option Module chassis (if any)
Master
For sealing master section chassis (1x included in each Frame package)
Installing Compression Panels is the same for S4 and S6 (in the following images S6 is shown).
Figure 20. Example placement of Fill Panels
Figure 21. Compression Panels: CSM (left) Channel (center) and Master (right)
Mini Fill Panel
Fill Panel Small
Fill Panel Small
Fill Panel Small
Fill Panel Small
Fill Panel Small
Mini Fill Panel
Fill Panel Small
Mini Fill Panel