Avid Technology MC Control, Руководство пользователя

Страница: 34 / 55

MC Control User Guide 32
Surfaces
The Surfaces tab shows all Artist Series media controllers on your network and those connected to your instance of EuControl.
Control Unit Banks Independently
This option is only available when an MC Control is selected in the My Surfaces list. When enabled, each Artist Series unit can
bank independently of each other. In applications that support it, this lets you configure one unit for dedicated control of output
busses, for example.
All Surfaces
All Surfaces
shows all Artist media controllers on the network. A device shown in light gray is already connected either to your
own or another instance of EuControl running on a different workstation. In both cases, it is not selectable.
My Surfaces
My Surfaces
shows the Artist media controllers connected to your instance of EuControl. There can be one MC Control, one
MC Transport, and up to four MC Mixes in the My Surfaces list, linked into a single large surface.
The top-to-bottom order corresponds to the left-to-right order of the surfaces, respectively. The left-most surface has fader
number 1. Use the up and down buttons (to the right of the My Surfaces list) to reorder the list.
Each Artist Series controller can be renamed by double-clicking the existing name and typing a new name.
Add
Click
Add
to add the selected All Surfaces entry to My Surfaces. This connects this Artist Series controller to your instance of
EuControl. You can also click and drag an Artist media controller from All Surfaces to My Surfaces.
Add
is disabled if all Artist media controllers in All Surfaces are connected to any instance of EuControl.
Surfaces tab