Avid Technology MC Control, Руководство пользователя

Страница: 10 / 55

MC Control User Guide 6
To remove the riser brackets:
1
Slide the side panels off.
2
Press the tabs to release the riser brackets.
3
Lift the riser bracket out of the MC Control to remove
Attaching an MC Control to Additional Units
An MC Control can be physically attached to up to four MC Mixes and one MC Transport to form a larger, stable control surface.
To join an MC Control to an MC Mix:
1
On the MC Control, use a #2 Phillips screwdriver to remove the two silver screws. The screws may be tight, so you may have
to use some force.
If you are using multiple units, see “Surfaces” on page 32 to use EuControl to arrange the units in the desired order.
Removing screws from the bottom panel