Avid Technology MC Control, Руководство пользователя

Страница: 35 / 55

Chapter 6: EuControl 33
Remove
Click Remove to remove the selected surface from My Surfaces and make it available to other instances of EuControl.
Remove is disabled if no surface is selected.
Automatically Add
The
Automatically Add
menu has two settings that control what happens to stored Surfaces between shutdown and startup.
All Surfaces (default)
This setting is best used when you are the only person running EuControl in your home or studio. It pro-
vides an easy plug-and-play experience by automatically adding your All Surfaces list to your My Surfaces list so you never have
to manually edit the My Surfaces list.
My Surfaces Only
This setting is useful in facilities where other EuControl users are on your network. When EuControl starts,
only the surfaces from your My Surfaces list are added. Because a surface can only be claimed by one user at a time, this avoids
claiming another user’s surfaces.
Update Firmware
Each time a new version of EuControl is installed, each MC Transport, MC Control, and MC Mix in your system may need its
firmware updated. The firmware is embedded in EuControl so an Internet connection is not required.
To update firmware:
1
Select each Artist Series controller in the My Surfaces list (Shift-click to select multiple devices).
2
Click
Update Firmware
to update their firmware. If a dialog displays a message that the firmware is up to date, no further action
is necessary.
3
Follow the instructions in the EuControl dialog box. While updating firmware, observe the following:
• The Artist Series controllers must be plugged into a working power source.
• Do not power off any units during the update or attempt to interrupt the update.
• The status for each unit being updated is displayed on that device as well as in the EuControl dialog box.
Show Info
Select an Artist media controller and click Show Info to display the name, and hardware and software information on-screen.