Avid Technology MC Control, Руководство пользователя

Страница: 9 / 55

Chapter 2: Setup and Installation 5
Chapter 2: Setup and Installation
Unpacking and Elevating the MC Control
Unpack MC Control, its power adapter, AC power cord, Installer disc, Ethernet crossover cable, and riser brackets.
MC Control can be elevated or angled using small foldout legs on the bottom of the unit or elevated and angled by attaching the
larger riser brackets. Since either method requires turning MC Control over, it is easier to do this before attaching any cables. Turn
it over and place it on a soft surface.
Pull out all four of the small foldout legs to moderately elevate the unit; pull out only the back two to angle the unit towards you.
Pull out the metal clips from the same area as the legs and move them until they snap into the legs.
Two larger, detached riser brackets elevate and angle the unit more than the foldout legs. Use moderate force to snap them into
the bottom panel as shown.